M2200 Radius Flush Grid Modular Belt

Pitch 38.1 mm Minimum Width 342 mm Width Increments 127 mm Open Area 50% Belt thickness 18.8 mm Rod diameter 6 mm Radius min 2.2 x belt width Back bending radius min 35 mm

Key words：

socket

technology

32A

Category：

E-mial：

● Belt openings pass straight through the belt to simplify cleaning.

● Lightweight, strong belt with a smooth surface grid.

● Designed for radius applications with a minimum turn radius of 2.2 times belt width (measured from inside edge).

● Maximum belt width in turns: 914 mm.

● Contact Path Conveyor for precise belt measurements and stock status before designing equipment or ordering a belt.

Belt data
Belt material	Rod material	Nominal tensile strength straight run N/M (21°C)	Belt weight kg/m²	Standard range of belt widths mm
POM	PP	36000	13.70	342+127*n
POM	PA	37000	13.80
PP	PP	21000	8.70
PE	PE	14000	9.40

Sprocket data
Part number	No.of Teeth	Bore Dia.mm		Pitch Dia. mm	Outside Dia. mm	Processing Technic	Material
		Round Bore	Square Bore
SP-2200-8T	8	30-40		99	102	Machined	PA/PP
SP-2200-10T	10	30-40		123	125
SP-2200-11T	11	30-40		135	137
SP-2200-13T	13	30-50		160	163
SP-2200-16T	16	30-50		196	198

Remark:

Real belt widths are in most cases 0.1% to 0.3% smaller.

For PE material up to 750 mm (30") -2 mm to 1 mm and -0.3% to 0.1% for wider belts.

For PP material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

For POM material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

The nominal tensile strength is valid for 21 °C. The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.

Disclaimer:

Product Application Disclaimer (valid for ALL Path conveyor products and mentioned on all PDS)

This disclaimer is made by and on behalf of Path conveyor and its affiliated companies, directors, employees, agents and contractors (hereinafter collectively "Path conveyor") with respect to the products referred to herein (the "Products"). SAFETY WARNINGS SHOULD BE READ CAREFULLY AND ANY RECOMMENDED SAFETY PRECAUTIONS BE FOLLOWED STRICTLY! Please refer to the Safety Warnings herein, in the Path conveyor catalogue as well as installation and operating manuals. All indications / information as to the application, use and performance of the Products are recommendations provided with due diligence and care, but no representations or warranties of any kind are made as to their completeness, accuracy or suitability for a particular purpose. The data provided herein are based on laboratory application with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experience may lead to re-assessments and modifications within a short period of time and without prior notice.

EXCEPT AS EXPLICITLY WARRANTED BY PATH CONVEYOR, WHICH WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, THE PRODUCTS ARE PROVIDED "AS IS".

无

MESSAGE

* Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible

Committed to promoting the continuous progress and development of the industry, constantly creating value, and working hand in hand with you to create a better future.

Guangzhou SINODA Intelligent Equipment Co., LTD

Contact number：

Miss Wu：+8613751706955

Contact number：

Mr. Zheng：+8615818154357

E-mial：sales@pathtechco.com

Address: No. 67, Jinyu West Street, Panyu District, Guangzhou

Guangzhou SINODA Intelligent Equipment Co., LTD