M400 Raised Rib Modular Belt

Pitch 50.8 mm Minimum Width 609.6 mm Width Increments 152.4 mm Open Area 26% Belt thickness 21.4 mm Rod diameter 6 mm Back bending radius min 100 mm

Key words：

socket

technology

32A

Category：

E-mial：

● Use with finger transfer plates to reduce tippage at infeed and discharge.

● Raised ribs extend 6.1 mm above basic module.

● Contact Path Conveyor for precise belt measurements and stock status before designing equipment or ordering a belt.

Belt data
Belt material	Rod material	Nominal tensile strength straight run N/M (21°C)	Belt weight kg/m²	Standard range of belt widths mm
POM	PP	47600	14.80	609.6+152.4*n
POM	PA	48000	14.90
PP	PP	36000	9.50
PE	PE	27000	10.00

Sprocket data
Part number	No.of Teeth	Bore Dia.mm		Pitch Dia. mm	Outside Dia. mm	Processing Technic	Material
Part number	No.of Teeth	Round Bore	Square Bore	Pitch Dia. mm	Outside Dia. mm	Processing Technic	Material
SP-400-6T	6		40	91.6	101.6	Injection Molding	POM/PA/PP
SP-400-10T	10		40	160.4	164.4
SP-400-12T	12		40/50/60	193.6	196.3
SP-400-16T	16		90/102	259	260.4

Remark:

Real belt widths are in most cases 0.1% to 0.3% smaller.

For PE material up to 750 mm (30") -2 mm to 1 mm and -0.3% to 0.1% for wider belts.

For PP material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

For POM material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

The nominal tensile strength is valid for 21 °C. The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.

Disclaimer:

Product Application Disclaimer (valid for ALL Path conveyor products and mentioned on all PDS)

This disclaimer is made by and on behalf of Path conveyor and its affiliated companies, directors, employees, agents and contractors (hereinafter collectively "Path conveyor") with respect to the products referred to herein (the "Products"). SAFETY WARNINGS SHOULD BE READ CAREFULLY AND ANY RECOMMENDED SAFETY PRECAUTIONS BE FOLLOWED STRICTLY! Please refer to the Safety Warnings herein, in the Path conveyor catalogue as well as installation and operating manuals. All indications / information as to the application, use and performance of the Products are recommendations provided with due diligence and care, but no representations or warranties of any kind are made as to their completeness, accuracy or suitability for a particular purpose. The data provided herein are based on laboratory application with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experience may lead to re-assessments and modifications within a short period of time and without prior notice.

EXCEPT AS EXPLICITLY WARRANTED BY PATH CONVEYOR, WHICH WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, THE PRODUCTS ARE PROVIDED "AS IS".

无

M400 Roller Top Modular Belt

MESSAGE

* Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible

Committed to promoting the continuous progress and development of the industry, constantly creating value, and working hand in hand with you to create a better future.

Guangzhou SINODA Intelligent Equipment Co., LTD

Contact number：

Miss Wu：+8613751706955

Contact number：

Mr. Zheng：+8615818154357

E-mial：sales@pathtechco.com

Address: No. 67, Jinyu West Street, Panyu District, Guangzhou

Guangzhou SINODA Intelligent Equipment Co., LTD