CONSTRUCTION CONVEYOR LINE SAFETY FIELD
CONSTRUCTION CONVEYOR LINE SAFETY FIELD

CONSTRUCTION CONVEYOR LINE SAFETY FIELD

+

M800 Perforated Flat Top Modular Belt

Pitch 50.8 mm Minimum Width 152.4 mm Width Increments 152.4 mm Open Area 18% Belt thickness 16 mm Rod diameter 6 mm Back bending radius min 75 mm

Key words：

socket

technology

32A

Category：

Pitch 50.8 mm

E-mial：

sales@pathtechco.com

Inquiry
Contact us
Product details

● Smooth upper surface with fully flush edges.

● Perforated version of M800 Flat Top.

● Contact Path Conveyor for precise belt measurements and stock status before designing equipment or ordering a belt.

Belt data

Belt material

Rod material

Nominal tensile strength straight run N/M (21°C)

Belt weight kg/m²

Standard range of belt widths mm

POM

PP

20000

11.80

152.4*n

PA

21000

11.90

PP

PP

15000

7.90

PE

PE

8000

8.40

Sprocket data

Part number

No.of Teeth

Bore Dia.mm

Pitch Dia. 

mm

Outside 

Dia. mm

Processing 

Technic

Material

Round 

Bore 

Square Bore

SP-800-6T

6

30-40

97

102

Machined

PA/PP

SP-800-8T

8

30-40

127

132

SP-800-10T

10

35/40

38/40

157

165

Injection Molding

POM/PA/PP

SP-800-12T

12

 

40

191

196

SP-800-16T

16

40-60

257

262

Machined

PA/PP

Remark:

Real belt widths are in most cases 0.1% to 0.3% smaller.

For PE material up to 750 mm (30") -2 mm to 1 mm and -0.3% to 0.1% for wider belts.

For PP material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

For POM material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

The nominal tensile strength is valid for 21 °C. The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.

Disclaimer: 

Product Application Disclaimer (valid for ALL Path conveyor products and mentioned on all PDS)

This disclaimer is made by and on behalf of Path conveyor and its affiliated companies, directors, employees, agents and contractors (hereinafter collectively "Path conveyor") with respect to the products referred to herein (the "Products"). SAFETY WARNINGS SHOULD BE READ CAREFULLY AND ANY RECOMMENDED SAFETY PRECAUTIONS BE FOLLOWED STRICTLY! Please refer to the Safety Warnings herein, in the Path conveyor catalogue as well as installation and operating manuals. All indications / information as to the application, use and performance of the Products are recommendations provided with due diligence and care, but no representations or warranties of any kind are made as to their completeness, accuracy or suitability for a particular purpose. The data provided herein are based on laboratory application with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experience may lead to re-assessments and modifications within a short period of time and without prior notice.

EXCEPT AS EXPLICITLY WARRANTED BY PATH CONVEYOR, WHICH WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, THE PRODUCTS ARE PROVIDED "AS IS".

Previous page

M800 Nub Top Modular Belt

M800-1 Perforated Flat Top Modular Belt

Next page

Related products

undefined

undefined

MESSAGE

Security verification
SUBMIT

* Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible