Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
CONSTRUCTION CONVEYOR LINE SAFETY FIELD
CONSTRUCTION CONVEYOR LINE SAFETY FIELD
PRODUCT DISPLAY
M2400 Radius Flush Grid Modular Belt
Key words：
socket
technology
32A
Category：
● Belt openings pass straight through the belt to simplify cleaning.
● Sprocket drive system is designed to minimize wear and require low return side tension.
● Designed for radius applications with a turn radius of 2.2 times the belt width (measured from inside edge).
● Contact Path Conveyor for precise belt measurements and stock status before designing equipment or ordering a belt.
|
Belt data |
||||
|
Belt material |
Rod material |
Nominal tensile strength straight run N/M (21°C) |
Belt weight kg/m² |
Standard range of belt widths mm |
|
POM |
PP |
26000 |
7.90 |
152.4*n |
|
PA |
26000 |
7.90 |
||
|
PP |
PP |
15000 |
5.20 |
|
|
PE |
PE |
8000 |
5.60 |
|
|
Sprocket data |
|||||||
|
Part number |
No.of Teeth |
Bore Dia.mm |
Pitch Dia. mm |
Outside Dia. mm |
Processing Technic |
Material |
|
|
Round Bore |
Square Bore |
||||||
|
SP-2400-6T |
6 |
20 |
|
50.8 |
51 |
Machined |
PA/PP |
|
SP-2400-9T |
9 |
25 |
25 |
74.3 |
75 |
||
|
SP-2400-12T |
12 |
25-40 |
40 |
98.1 |
102 |
||
|
SP-2400-16T |
16 |
25-40 |
40 |
130.2 |
132 |
||
|
SP-2400-20T |
20 |
25-40 |
40 |
162.4 |
163 |
||
Remark:
Real belt widths are in most cases 0.1% to 0.3% smaller.
For PE material up to 750 mm (30") -2 mm to 1 mm and -0.3% to 0.1% for wider belts.
For PP material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.
For POM material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.
The nominal tensile strength is valid for 21 °C. The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.
Disclaimer:
Product Application Disclaimer (valid for ALL Path conveyor products and mentioned on all PDS)
This disclaimer is made by and on behalf of Path conveyor and its affiliated companies, directors, employees, agents and contractors (hereinafter collectively "Path conveyor") with respect to the products referred to herein (the "Products"). SAFETY WARNINGS SHOULD BE READ CAREFULLY AND ANY RECOMMENDED SAFETY PRECAUTIONS BE FOLLOWED STRICTLY! Please refer to the Safety Warnings herein, in the Path conveyor catalogue as well as installation and operating manuals. All indications / information as to the application, use and performance of the Products are recommendations provided with due diligence and care, but no representations or warranties of any kind are made as to their completeness, accuracy or suitability for a particular purpose. The data provided herein are based on laboratory application with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experience may lead to re-assessments and modifications within a short period of time and without prior notice.
EXCEPT AS EXPLICITLY WARRANTED BY PATH CONVEYOR, WHICH WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, THE PRODUCTS ARE PROVIDED "AS IS".
Previous page
Next page
Related products
undefined
MESSAGE
* Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible
Committed to promoting the continuous progress and development of the industry, constantly creating value, and working hand in hand with you to create a better future.
Guangzhou SINODA Intelligent Equipment Co., LTD
Contact number：
Contact number：
Address: No. 67, Jinyu West Street, Panyu District, Guangzhou
Guangzhou SINODA Intelligent Equipment Co., LTD
