M900 Flat Top Modular Belt

Pitch 27.2 mm Minimum Width 152.4 mm Width Increments 152.4 mm Open Area 0% Belt thickness 9.8 mm Rod diameter 4.8 mm Back bending radius min 35 mm

Key words：

socket

technology

32A

Category：

E-mial：

● Smooth, closed surface with fully flush edges.

● Ideal for handling glass and other containers.

● Contact Path Conveyor for precise belt measurements and stock status before designing equipment or ordering a belt.

Belt data
Belt material	Rod material	Nominal tensile strength straight run N/M (21°C)	Belt weight kg/m²	Standard range of belt widths mm
POM	PP	22000	7.30	152.4*n
POM	PA	22000	7.40
PA	PA	19000	6.80
PP	PP	12000	4.70
PE	PE	7500	5.00

Sprocket data
Part number	No.of Teeth	Bore Dia.mm		Pitch Dia. mm	Outside Dia. mm	Processing Technic	Material
		Round Bore	Square Bore
SP-900-12T	12	25/30	40	105.1	107.4	Injection Molding	POM/PP/PA
SP-900-18T	18	30	38.1/40	156.64	160
		35	60/63.5
		40	65
SP-900-20T	20	40-60	40/50	173.87	178
			60

Remark:

Real belt widths are in most cases 0.1% to 0.3% smaller.

For PE material up to 750 mm (30") -2 mm to 1 mm and -0.3% to 0.1% for wider belts.

For PP material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

For POM material up to 750 mm (30") -3 mm to 0 mm and -0.4% to 0% for wider belts.

The nominal tensile strength is valid for 21 °C. The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.

Disclaimer:

Product Application Disclaimer (valid for ALL Path conveyor products and mentioned on all PDS)

This disclaimer is made by and on behalf of Path conveyor and its affiliated companies, directors, employees, agents and contractors (hereinafter collectively "Path conveyor") with respect to the products referred to herein (the "Products"). SAFETY WARNINGS SHOULD BE READ CAREFULLY AND ANY RECOMMENDED SAFETY PRECAUTIONS BE FOLLOWED STRICTLY! Please refer to the Safety Warnings herein, in the Path conveyor catalogue as well as installation and operating manuals. All indications / information as to the application, use and performance of the Products are recommendations provided with due diligence and care, but no representations or warranties of any kind are made as to their completeness, accuracy or suitability for a particular purpose. The data provided herein are based on laboratory application with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experience may lead to re-assessments and modifications within a short period of time and without prior notice.

EXCEPT AS EXPLICITLY WARRANTED BY PATH CONVEYOR, WHICH WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, THE PRODUCTS ARE PROVIDED "AS IS".

无

M900 Flush Grid Modular Belt

MESSAGE

* Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible

Committed to promoting the continuous progress and development of the industry, constantly creating value, and working hand in hand with you to create a better future.

Guangzhou SINODA Intelligent Equipment Co., LTD

Contact number：

Miss Wu：+8613751706955

Contact number：

Mr. Zheng：+8615818154357

E-mial：sales@pathtechco.com

Address: No. 67, Jinyu West Street, Panyu District, Guangzhou

Guangzhou SINODA Intelligent Equipment Co., LTD